2-42 System Utilities
3. Execute WQDMI /GWuuid to write the UUID by auto generate.
Figure 2-73. Write UUID by Auto-generate
4. At the command prompt, type wpeutil shutdown to sync memory map data into
EEPROM (System will shutdown). Alternatively, turn off the system by pressing and
holding the Power button for 4 seconds.
Figure 2-74. WQDMI S Command Prompt
Do not remove the AC adapter during shutdown. It will cause the
EEPROM to lose the data.
C:\DMI
>WQDMI /GWuuid
========================================================
WQDMI - Quanta NB4 DMI tool for Windows
Version: 0.03 2013/04/18
Based on EEPROM V2.11 spec.
If you want to use SPACE character in your string,
please use ‘~’ to replace it.
========================================================
EEPROM data is :
5C09D13E1ACDCEACE08E00269E9E2D22
EEPROM data is :
5C09D13E1ACDCEACE08E00269E9E2D22
D:\WQDMI
>wpeutil shutdown
To Next Page
Loading...
