Acer Aspire V7-582 - System Power Management; System LED Indicator

1-44 Hardware Specifications and Configurations
System Power Management
System LED Indicator
Item Specification
Mech. Off (G3) All devices in the system are turned off completely.
Soft Off (G2/S5) OS initiated shutdown. All devices in the system are turned
off completely.
Working (S0/S1) Individual devices such as the CPU and hard disc may be
power managed in this state.
Suspend to RAM (S3)
 CPU set power down
 VGA Suspend
 PCMCIA Suspend
 Audio Power Down
 Hard Disk Power Down
 CD-ROM Power Down
 Super I/O Low Power mode
Save to Disk (S4) Also called Hibernation Mode. System saves all system states
and data onto the disc prior to power off the whole system.
Item Specification
System state
 System on = Blue
 System off = Blue and orange color off
 Stand-by = Breeze mode Orange (1 sec on, 3 sec off)
 Hibernation Mode = N/A
Battery state
 Full charging = Blue
 Battery charging = Orange
 Battery low = Breeze mode Orange (1 sec on, 3 sec off)
 Battery critical low = Blinking mode Orange (1 sec on, 1 sec
off)
 Using battery or not connected to AC power: N/A
Communication state
 3G on, or both 3G and WiFi on = Blue
 WiFi on = Orange
If the system does not require 3G, single color LED is used.
HDD access state HDD access active = Blue (Fast blinking means HDD/SSD/Card
reader is running or accessing to data)
Caps/Num Lock state Blue (It shows Blue color as well when capital lock is enabled
is S0, S1)
ODD activity state ODD active = Green or Orange (depends on module)
Power button backlight
 Blue color solid on: System on
 Blue color off: System off