2-30 System Utilities
Using DMI Tools 0
The DMI (Desktop Management Interface) Tool copies BIOS information to EEPROM
(Electrically Erasable Programmable Read-Only Memory). Used in the DMI pool for
hardware management.
When the BIOS shows Verifying DMI pool data, it is checking that the table
correlates with the hardware before sending information to the operating system
(Windows, etc.).
There are two methods to update the DMI Pool Data as follows:
Method 1: 0
To update the DMI Pool under DOS mode, perform the following:
1. Prepare a bootable USB Flash Disk.
2. Copy
DQDMI.exe
to the bootable USB Flash Disk.
3. Insert the USB Flash Disk and power on the system.
4. Press
F2
during boot and change the BIOS Main menu item F12 Boot Menu to
Enabled.
Figure 2-49. F12 Boot Menu enable
5. Change the BIOS Boot menu item Boot Menu to Legacy.
Figure 2-50. Legacy BIOS option
To Next Page
Loading...
