Machine Maintenance Procedures 3-77
Replacing the Mainboard 0
1. Place the mainboard onto the top assembly (Figure 3-93).
Figure 3-93. Replacing the Mainboard
2. Rotate the left hinge (H) to a horizontal position to lay against the mainboard
(Figure 3-94).
3. Install and secure two (2) screws (G) securing the left hinge in place (Figure 3-94).
4. Install and secure three (3) screws (I) securing the mainboard in place (Figure 3-94).
Figure 3-94. Mainboard Screw Location
5. Connect the USB board FPC to the mainboard connector (F) (Figure 3-95).
To Next Page
Loading...
