Acer Aspire V7-582 - Replacing the Thermal Cap (UMA)

Machine Maintenance Procedures 3-79
Replacing the Thermal Cap (UMA) 0
1. Place the thermal cap on the system. (Figure 3-96).
Figure 3-96. Thermal Cap (UMA) Screws
2. Tighten two (2) captive screws (D) (Figure 3-96).
3. Secure the eDP and DC-in cable along the cable guides (C) (Figure 3-97).
Figure 3-97. Thermal Cap (UMA)
4. Connect the DC-in cable to the mainboard connector (B) (Figure 3-97).
5. Connect the eDP cable to the mainboard connector (A) (Figure 3-97).
D
A
B
C