2-14 System Utilities
DOS Flash Utility 0
Perform the following to use the
DOS Flash Utility
:
1. Prepare a bootable USB Flash Disk.
2. Copy
ZRQ_203.exe
in the
Formal
folder to the bootable USB Flash disk.
3. Insert the USB Flash Disk into the system and power on the system.
4. Press
F2
during boot and change the BIOS Main menu item F12 Boot Menu to
Enabled.
Figure 2-12. F12 Boot Menu enable
5. Change the BIOS Boot menu item Boot Menu to Legacy.
Figure 2-13. Legacy BIOS option
6. Press
F10
to Save and exit.
7. Press
F12
during the POST (power-on self-test) screen to enter the Boot Menu. Select
USB HDD and boot to DOS.
To Next Page
Loading...
