Acer Aspire V7-582 - DC-In Jack Removal

3-20 Machine Maintenance Procedures
DC-in Jack Removal 0
Prerequisite:
Battery Pack Removal
1. Find DC-in cable (D) on the top assembly. Refer to Figure 3-7.
2. Disconnect DC-in cable from the mainboard connector (A) (Figure 3-13).
3. Remove DC-in cable (B) from the cable guides (Figure 3-13).
4. Remove DC-in Jack and cable (C) from the top assembly.
Figure 3-13. DC-in Jack
A
B
C