Acer Aspire V7-582 - Chapter 2; System Utilities

System Utilities 2-31
6. Press F10 to Save and exit.
7. Press
F12 during the POST (power-on self-test) screen to enter the Boot Menu. Select
USB HDD and boot to DOS.
Figure 2-51. Selecting HDD
8. Type dqdmi
and press Enter . To execute a specific function, input the command and
the associated parameter.
Figure 2-52. DMI Tools Main Menu Screen
C:\
>dqdmi.exe
If you want to use SPACE character in your string,
please use ‘~’ to replace it.
=====================================================
DQDMI /Rp -> Read Product Name
DQDMI /Wp [string] -> Write Product Name: 24 characters
DQDMI /Rslic -> Read SLIC status
DQDMI /Wslic [number] -> Write SLIC status: 0-Disable, 1-Enable
DQDMI /Rmac -> Read LAN MAC address
DQDMI /Wmac [string] -> Write LAN MAC address: 6 characters
DQDMI /Rmbsn -> Read Mainboard Serial Number
DQDMI /Wmbsn [string] -> Write Mainboard Serial Number: 22 characters
DQDMI /Rfgsn -> Read F/G Serial Number
DQDMI /Wfgsn [string] -> Write F/G Serial Number: 22 characters
DQDMI /Rasset -> Read Asset Tag
DQDMI /Wasset [string] -> Write Asset Tag: 32 characters
DQDMI /Rm -> Read Manufacture Name
DQDMI /Wm [string] -> Write Manufacture Name: 15 characters
DQDMI /Ruuid -> Read UUID
DQDMI /GWuuid -> Write UUID by auto generate
DQDMI /Wuuid [string] -> Write UUID: 16 characters
DQDMI S ==> Sync memory map data into EEPROM (System will shutdown)