Acer Aspire V7-582 - Page 90

2-32 System Utilities
Method 2: 0
To update the DMI Pool under Windows mode, perform the following:
1. Prepare a bootable WINPE USB Flash Disk. For a WINPE x64 bootable USB Flash Disk,
refer to Creating a WINPE x64 bootable USB Flash disk.
2. Check the WINPE version (X86/X64).
3. For WinPE X86, copy wqdmi.exe to a WINPE x86 bootable USB Flash Disk.
4. For WinPE x64, copy wqdmix64.exe to a WINPE x64 bootable USB Flash Disk. Rename
the filename from wqdmix64.exe to wqdmi.exe.
5. Insert the USB Flash Disk and power on the system.
6. Press
F2 during boot and change the BIOS Main menu item F12 Boot Menu to
Enabled.
Figure 2-53. F12 Boot Menu enable
7. For WinPE x86, change the BIOS Boot menu item Boot Menu to Legacy. For WinPE
x64, change the BIOS Boot menu item Boot Menu to UEFI.
Figure 2-54. Legacy BIOS option
8. Press
F10 to Save and exit.