5-6 Jumper and Connector Locations
Figure 5-5. Supervisor Backdoor Key Window
5. Prepare a bootable USB Flash Disk.
6. Copy the
UnlockHD.EXE
file to the USB Flash Disk.
7. Insert the USB Flash Disk into another system and power on the system.
8. Press
F2
during boot and change the BIOS Main menu item F12 Boot Menu to
Enabled.
Figure 5-6. F12 Boot Menu enable
9. Change the BIOS Boot menu item Boot Menu to Legacy.
Figure 5-7. Legacy BIOS option
10. Press
F10
to Save and exit.
To Next Page
Loading...
