Acer AT2010 - Page 22

English
22
Scanning for channels
1
MENU
Press the MENU key on the remote control to bring up the OSD.
2
Use the directional keys to navigate and select Channel Management.
3
MENU
Highlight Auto Scan. Then, select Start
and press OK to begin.
4
MENU
MENU
Select OK and press MENU to exit.
Re-scan for channels
The first time you completed the setup wizard, all available channels were listed. If you need to re-scan for new channels, please
follow the steps below:
MENU
AT201X.EU.UK.indb 22 3/21/2006 8:07:44 PM