6-4 User’s Manual
6.1.2 Startup Configuration
Terms Description Settings*
Boot Display If set to Auto and an external display is present,
the notebook uses the external display; otherwise,
the LCD is the display device. If set to Both,
the notebook uses the external display and LCD
simultaneously.
• Auto*
• Both
Memory Test The notebook can test main memory for errors
when you turn it on. If Enabled allows the
notebook to bypass the memory test and speed
up the self-test procedure.
• Enabled
• Disabled*
Silent Boot The notebook does not display POST messages
on your display.
• Enabled
• Disabled*
System Boot
Drive
This parameter determines which drive the
notebook boots from when you turn it on.
• Drive A Then C*
• Drive A
• Drive C
• Drive C Then A
If notebook resolution is set at 640x480, the image on the
notebook and external monitor will not be full-screen. For
full-screen image, set-up notebook at 800x600 resolution.
An installed PC Card bootable card overrides the System
Boot Drive setting. The notebook supports SRAM card
boot.
* Default Setting
To Next Page
Loading...
