Acer P5270 - XGA DLP Projector - Test Equipment Needed; Service Mode

4-1
Condential
P5270/P5270 Refresh
4-1 Test Equipment Needed
- IBM PC with XGA resolution
- DVD player with Multi-system (NTSC/PAL/SECAM), equipped “Component”, “S-Video”
and “Composite”
- HDTV Tuner or Source (480P, 720P, 1080i)
- Minolta CL-100
- Quantum Data 802B or CHROMA2327
- After changing parts, check the information below.
4-2 Service Mode
No Step
1 Turn on the Projector and input the signal.
2 Do the following action sequentially to enter service mode menu.
(1) Press “Power”, “Left”, “Left” and “Menu” button sequentially.
(2) Service Mode will be shown.
(3) Choose “Exit” to leave the Service Mode after all.
Chapter 4
Function Test & Alignment Procedure
“Left” button
“Power” button
“Menu” button
Change
Parts/Update
Version
Update
Color
Wheel
Index
Reset Lamp
Use Time
Factory
Reset
EDID
Default
Language
Reset
(for P5270
Refresh)
Waveform
Download
(for P5270
Refresh)
M/B v v v v v v
FW v v v v
EDID v v
Color Wheel v
Lamp Module v
Lamp Driver v