Acer P5270 - XGA DLP Projector - Firmware Upgrade Procedure

P5270/P5270 Refresh
5-6
Condential
No Step Procedure Photo
1 Setup
1. Enter in Firmware
upgrade mode
(refer to the action of
5-2 Firmware upgrade
mode)
2. Link PC USB port and
projector USB port by
USB Cable.
2
Execute the “DLP
Compose(TM)Lite 7.1”.
3
Click “Edit” and “Prefer-
ences”.
4
1. Click “Library”.
2. Click “Browse” botton
and and navigate to the
directory where you put
“DLP Composer Lite V7.1
Set up”in (for P5270).
Note:
For P5270, please choose
"Library V7.10330"
For P5270 Refresh, please
choose "8M ash"
5
1. Click “Communica-
tions“.
2. Choose “USB“.
3. Click “OK“.
5-4 Firmware Upgrade Procedure
1
2
3
For P5270
For P5270 Refresh