Acer P5270 - XGA DLP Projector - Equipment Needed; Firmware Upgrade Mode

5-1
P5270/P5270 Refresh
Condential
Item Photo Item Photo
Projector
(P5270)
USB Cable
(42.87304G001)
Power Cord
(42.53506G002)
PC or
Laptop
5-1 Equipment Needed
Software : (DDP 2230-USB)
- DLP Composer (Version 7.1)
- Firmware
- Library V7.10330 (library le has to put in PC and set right path in 5-4 step 4)
(for P5270)
Hardware :
Chapter 5
Firmware Upgrade Procedure
5-2 Firmware Upgrade Mode:
Item Photo
Before doing firmware upgrade, please get into
rmware mode rst. How to get into rmware mode:
Hold on “MENU” button then plug in power cord.
“MENU” button must be held until Temp and Lamp
LED light up.
- 8M ash (library le has to put in PC and set right path in 5-4 step 4) (for P5270 Refresh)