Acer P5270 - XGA DLP Projector - Reset(OSD); Test Condition

4-2
P5270/P5270 Refresh
Condential
4-4 Test Condition
- Circumstance Brightness : Dark room less than 5 lux.
- Inspection Distance : 1.8m~2.5m for functional inspection
- Screen Size : 60 inches diagonal (wide)
- After repairing each P5270/P5270 Refresh, the unit should be run-in (Refer to the table
below).
Symptom Run-in Time
Normal Repair 2 Hours
NFF 4 Hours
Auto Shutdown 6 Hours
4-3 Reset(OSD)
No Step
1 After nal QC step, we have to erase all saved change again and restore the
OSD default setting.The following actions will allow you to erase all end-users’
settings and restore the original setting:
(1) Please enter OSD menu.
(2) To execute “Reset” function .