Acer P5270 - XGA DLP Projector - Setup Procedure (VGA1,VGA2,DVI)

6-4
P5270/P5270 Refresh
Condential
No Step Procedure Photo
1 Connect
all ports
1. Connect P1 of
Fixture with COM
Port of PC/Laptop
by RS232 Cable.
2. Connect P2 of
Fixture with VGA
port of P5270
by VGA Cable.
3. Connect P3 of
Fixture with DVI
port of P5270 by
DVI Cable.
4. Plug Power
Adapter to Power
CNN.
5. Plug Power Cord
to P5270 unit.
Note: Conrm JP3 is
“Close” status.
6-2 Setup Procedure (VGA1,VGA2,DVI)
VGA Port
VGA1
Power Port
DVI Port
P1
P2
P3
Power CNN
VGA2
DVI