Acer P5270 - XGA DLP Projector - Page 79

5-5
P5270/P5270 Refresh
Condential
No Step Procedure Photo
1 Setup
1. Plug in Power cord to
projector.
2. Link PC USB port and
projector USB port by
USB Cable.
2 Installa-
tion
1. “Found new hardware
wiszard“ will be appe-
arred on the screen.
2. Select “Install the
software automatically
(Recommended)“
3. Then click “Next“
3 Finish
Click “Finish“ to end the
installation.
USB Driver Installation Procedure
2
3