Acer S1200 - Page 62

S1200
Condential
4-6
Criteria -The dark blemish is unacceptable when it is
more than four under blue 60 pattern
- Ref. above table
Note: The defect criteria follows TI specication.
4. Dead Pixel (Bright pixel)
Procedure - Test equipment: video generator.
- Test signal: analog 1024x768@60Hz.
- Test Pattern: full black
Inspection item - Bright pixel check.
Note: Frame dimension under operative zone1
inch
Criteria - Bright pixel is unacceptable.
- Ref. above table
Note: The defect criteria follows TI specication.
5. Dead Pixel (Dark pixel)
Procedure - Test equipment: video generator.
- Test signal: analog 1024x768@60Hz.
- Test Pattern: full white
Inspection item - Dead pixels check.
- White pattern (IRE=100)
- Adjacent dark pixel.
Criteria - The number of the dead pixels should be less or
equal to 6 pixels.
- Adjacent pixel with each other is unacceptable.
- Ref. above table
Note: The defect criteria follows TI specication.
Full black
Full white