Acer S230HL - Page 34

4. Assembly and Disassembly Procedure ACER S230HL 32
Go to contents page
S7
1. Tightening the bracket of D-Sub/DVI on the Main board with four HEX-head screws.
(The HEX-head screw size = MAC. SCREW-MHSW #4-40*5.0L,Ni)
2.
Using the Phillips-head screwdriver to tighten 4 screws to fix Main board and shielding cover
on the Panel’s UDM.
(MAC SCREW-MB M3.0*5.0L,BLK-Ni,Torque=5±1kgf.cm)
2.
2.
1.