Acer X34 - OLED Pixel Statement; OLED Design of Image Sticking Prevention

vi
English
OLED pixel statement
The OLED unit is produced with high-precision manufacturing techniques. Nevertheless,
some pixels may occasionally misfire or appear as black or red dots. This has no effect on the
recorded image and does not constitute a malfunction.
This product has been shipped enabled for power management:
• Activate display’s Sleep mode within 5 minutes of user inactivity.
• Wake the monitor when it is in Active Off mode, move the mouse or press any keyboard
key.
OLED design of Image Sticking Prevention
Image Retention Refresh
To reduces the risk of image retention occurrence, if the monitor has been in use for Image
Retention Refresh more than 4 hours, Image Retention Refresh, will start automatically after
the monitor is turned off. You can also start Image Retention Refresh manually via OSD menu.
When Image Retention Refresh process begins, the monitor will display warning message the
power LED starts flashing blue and amber light alternately.
When the power LED lights off, this indicates the Image Retention Refresh process is
complete, the duration of the Image Retention Refresh is around 5 minutes.
Note: • During Image Retention Refresh process don’t turn off monitor and don’t
unplug the power.
• Image Retention Refresh can be pressed only when the screen has been
used for than 4 hours, before the time is exceeded it will be grayed out.
Adjust
OK
System
The monitor will automatically turn off and the
LED light will flash during this process.
Please note this process will take 10 minutes to
complete.after which the monitor will restart.
Press ‘Yes’ to proceed.
Warning Message
NO
Move OK
Yes