Acteon Mini LED - Wave form; Cure depth; Mains adapter

7.7 Wave form
Waveform (nominal value, irradiance, duration) Average irradiance over time
Rapid mode
1250 mW / cm
2
925 mW / cm
2
Pulsed mode
1020 mW / cm
2
754 mW / cm
2
Progressive mode
937 mW / cm
2
693 mW / cm
2
7.8 Cure depth
Cure depth in mm with a distance of 2 mm between the optical guide and the cure composite
Curing composite Rapid mode Pulsed mode Progressive mode
Z100 MP, 3M 3mm/2.5mm 2 mm/2.5mm 3mm/2.5mm
Tetric EvoCeram, Ivoclar Vivadent 2 mm/1.5 mm 1.5 mm/1.5 mm 2 mm/2 mm
Charisma, Heraeus - Kulzer 2 mm/2 mm 2 mm/1.5 mm 2.5 mm/2 mm
7.9 Mains adapter
The mains adapter is part of the medical device and helps to ensure its electrical safety. It must be installed near the
medical device and must be readily accessible.
The mains cord connects the mains adapter to the medical device
Only use the mains adapter supplied with your medical device.
Page 19/38 - User Manual | Mini LED™ | J02541|V8|(07)| 01/2017|NG13EN010H