ACTi A81 - DC 12 V Power Input

www.acti.com
Hardware Manual
10
Item
Description
the installation site. See How to Connect a Video
Output Device on page 31 for more information.
3
Memory Card Slot
Insert a memory card into this slot for local
recording purposes. See How to Install / Remove
the Memory Card on page 32 for more
information.
NOTE: Supports microSDHC and microSDXC
cards.
4
Reset Button
Restores the factory default settings of the
camera. To reset the camera, while the power is
off, press and hold the Reset Button until the
Amber LED, on the Ethernet port, lights up.
5
DC 12V Power
Input
In case the camera is connected to a non-PoE
(Power over Ethernet) switch, use this connector
to connect the camera to an external power
adapter (not included). See Connecting a Power
Adapter (Optional) on page 27 for more
information.