Hardware Manual
19
4. Attach the cable gland body to the hole of the camera.
5. Mount the camera onto the surface using the three (3) bundled screws with o-rings.
CAUTION: When using electric screwdrivers, be careful not to touch the internal camera
components while attaching the screws. Since electric screwdrivers vary in sizes, speed, and
force, they may bruise and damage the internal camera components.
DISCLAIMER: ACTi will not be responsible for camera damage caused by improper
installations or the misuse of equipment for installation.
6. Insert the cable through the conduit hole.
To Next Page
Loading...
