55
Chapter 5 Setting Up Static IP
5. Scroll down to the IP Configuration section on the existing page, click on the
circle next to “Static,” and enter the IP address obtained from the ISP work-
sheet in the IP text box.
☞
Note: The “Subnet” and “Gateway” text boxes are not used dur-
ing this procedure.
6. If provided with DNS settings on the ISP worksheet, click the circle next to
“Static” and enter the DNS addresses in the “DNS Configuration” section at
the bottom of the Actiontec DSL Modem Setup Page screen.
If no DNS settings were provided, go to step 7.
7. Click “Save and Restart” at the bottom of the screen.
To Next Page
Loading...
