29
Chapter 4 Configuring Advanced Setup Options
UPnP (Universal Plug and Play)
Selecting UPnP in the “Advanced Setup” screen generates the “UPnP” screen. In
this screen, the Universal Plug and Play option is turned on or off by activating the
appropriate circle.
Universal Plug and Play is a zero-configuration networking protocol that allows
hardware and software (such as Netmeeting) to operate more efficiently. If
Netmeeting is not running properly, activate UPnP.
☞
Note: Activating UPnP presents a slight security risk. After
finishing with the hardware or software using UPnP, we recom-
mend deactivating UPnP.
When finished in this screen, click Apply to activate any changes made.
Time Zone
Selecting Time Zone in the “Configuring the Advanced Settings” screen generates
the “Time Zone” screen. In this screen, select the time zone in which the Modem
is being used. Click in the “Day Light Saving” check box if Daylight Saving Time is
currently in effect where the Modem is being used.
When finished in this screen, click Apply to activate any changes made.
To Next Page
Loading...
Need help?
General
