Actron CP9580 - Page 68

Diagnostic Menu
4 – 16 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
4
4
From the Diagnostic Menu:
1. Select State OBD Check
•Use UP or DOWN
arrow key until State OBD
Check is highlighted
•Press
ENTER .
2. View State OBD Check
Display.
3. Return to Diagnostic Menu.
•Press
BACK
=====================
I/M Monitors
Read Codes
Erase Codes
MIL Status
State OBD Check 
View Data
Diagnostic Menu
State OBD Check
=====================
MIL Status ON
Codes Found 2
Monitors OK 3
Monitors Inc 3
Monitors N/A 5
State OBD Check