Actron CP9580 - Operating Errors and Erroneous Data; Battery Replacement

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 5 – 3
Troubleshooting
5
Operating Error or Erroneous Data
An Operating Error or Erroneous Data occurs if vehicle’s computer(s)
stop(s) communicating with Scan Tool.
1.Make Selection
• Use LEFT or
RIGHT arrow key.
•Press ENTER.
✓ See “Error Messages” on page 5-1 for possible causes.
Battery Replacement
The Scan Tool requires 4-AAA alkaline batteries to operate without
vehicle power.
✓ When the batteries need to be replaced, the low-battery icon (Z)
is displayed.
✓ Rechargeable batteries do not last as long as alkaline types and
are not recommended.
✓ Non-rechargeable Lithium (Li) battery can be used. Though
Lithium types last longer than the alkaline types, they are more
expensive.
Operating Error
Check Connections!
Try Again?
YES
 NO
YES
LINK ERROR