Actron CP9580 - Page 80

Diagnostic Menu
4 – 28 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
4
4
✓ The Scan Tool display is continuously updated. Monitors that are “ok”
will disappear and only the “inc” monitors will remain displayed.
Monitors designated “n/a” are not displayed.
✓ When all Monitors are “OK” the following Screen is shown.
4.Return to Diagnostic Menu.
• Press
BACK key.
=====================
Catalyst Mon inc
Htd Catalyst inc
Evap System Mon inc
This Drive Cycle
=====================
Catalyst Mon inc
Htd Catalyst inc
Evap System Mon inc
Since DTCs Cleared
OR
OR
=====================
All Supported
Monitors are OK
This Drive Cycle
Press ENTER
 to Cont
=====================
All Supported
Monitors are OK
Since DTCs Cleared
Press ENTER
 to Cont