Adam ACBplus Series - 3 Installation; Locating the Scale; Setting up the Scale

© Adam Equipment Company 2004
4
3.0 INSTALLATION
3.1 LOCATING THE SCALE
 Avoid extreme temperatures. Do not place the scale in direct
sunlight or near air conditioning vents. Avoid air movement
such as from fans or opening of doors and windows.
 Avoid unsuitable tables. The table or floor must be rigid and
not vibrate. Do not place near vibrating machinery.
 Avoid unstable power sources. Do not use the scale near
any large user of electricity such as welding equipment or
large motors.
 Avoid high humidity that might cause condensation. Avoid
direct contact with water. Do not spray or immerse the scales
in water.
 Keep the weighing area clean.
 Do not stack material on the scale when not in use.
 Protect the scale from extreme temperatures, vibration and
dust.
3.2 SETTING UP THE SCALE
 Remove the Shipping Protection screw from the bottom of
the base.