Adam ACBplus Series - Key Descriptions

© Adam Equipment Company 2004
6
3.5 KEY DESCRIPTIONS
KEYS PRIMARY FUNCTION SECONDARY FUNCTION
[On/Off]
To turn the scale On or Off.
----
[Zero]
Sets the zero point for all
subsequent weighing. The display
shows zero.
A secondary function is of "Enter"
key for setting parameters or other
functions.
[Tare]
Tares the scale. Stores the current
weight in memory as a tare value,
subtracts the tare value from the
weight and shows the results. This
is the net weight.
Pressing [Tare] again will cancel
the tare value.
[%]
Enters the percent weighing
function.
When in percentage mode, press
[%] key to return to normal weighing
mode.
[Smpl]
Use this key to enter counting
mode from the normal weighing
mode,
A secondary function allows the
user to return to normal weighing
mode while in counting mode. It
also clears the accumulated value
from the memory when pressed
during recalling the total.
[Mode]
Pressing this key will cycle through
the weighing units which are
enabled. It also scrolls through the
options during setting up a
parameter.
Displays the unit weight, total
weight and the count when in the
parts counting mode.
[Print]
To print the results to a PC or
printer using RS-232 (A USB
interface will be available shortly).
It also adds the value to the
accumulated memory if the
accumulation function is not
automatic.
Secondary function is to return to
normal operation when the scale is
in a parameter setting mode.