Name: Adastra RS605
Brand: Adastra
Rating: 4 (1 reviews)

To Next Page

RS605

5 x 60W Slave Amplifier

Item ref: 953.151UK

User Manual

Introduction

Thank you for choosing the Adastra RS605 rackmount 5 x 60W slave amplifier as part of your public

address system. This amplifier is designed to offer high quality, dependable service for mobile and

installed systems. Please read this manual fully and follow the instructions to achieve the best results

with your new purchase and to avoid damage through misuse.

Questions and Answers:

Need help?

Do you have a question about the Adastra RS605 and is the answer not in the manual?

Adastra RS605 Specifications

General

Power supply	110/230Vac, 50/60Hz
DC power	24Vdc screw terminals
Fuse	T5A (250V)
Output power	300Wrms (5 x 60W, all channels driven)
Input sensitivity	-10dBV
Frequency response	100Hz-20kHz
T.H.D.	1.0%
S/N ratio	90dB
Output connections	5 x modular terminals (COM/8 Ohms/100V)
Input connections	5 x paired RCA line
Controls	5 x volume, 5 x gain (rear), mode switch