19
Preference determines whether to record the program when shown in
standard definition or only when shown in high definition.
Episodes determines whether to record re-runs and new episodes of the
series or only new episodes.
Start and End determines how much time to add at the start and end time
of the recording so that none of the program is missed.
Limit To determines how many episodes of the series are saved. If set to
anything other than all, the system will delete the oldest recorded episode
of the series once the limit is reached.
Once you have adjusted the series settings, highlight OK and press OK to
save your changes.
Skip An Episode
Once you have created a series recording, you can manually
skip any episode.
Step 1: Pick The
Episode
Locate the episode in
the series you want
to skip. Highlight its
listing and press OK.
Step 2: Skip The Episode
Highlight Skip Episode
and press OK. You will be returned to Guide
and the red dots on the episode listing will turn grey to indicate you
are skipping that episode. If you decide to record this episode after all,
repeat this procedure and choose Record Episode from the options
shown and press OK. The dots will become red again.
5 Guide
To Next Page
Loading...
Need help?
General
