47
seconds, 2 minutes or 5 minutes, then press OK.
0 seconds will display your autotune at the exact time the program begins.
Any of the other settings will trigger the autotune that many seconds or
minutes before the program begins.
Hardware Settings
For service provider only.
Channel Blocking
Channel Blocking Edit displays a list of all channels available. You can
then block or unblock any channel. Blocked channels WILL
NOT APPEAR
in channel lineup.
To block channels, highlight the Channel
Blocking Edit button and press OK
If no changes have been made on the Preferences screen, you will go
directly to the list of all available channels. If any changes have been made
to the main Preferences screen and you have not already updated them, a
Save Changes box will appear. Highlight YES and press OK if you wish to
save these changes. The Settings Successfully Updated notice will then
appear. Highlight OK, and press the OK button
The Channel Blocking
list will appear.
To block/unblock a
channel, highlight the
channel entry and
press OK.
To go to the next
screen of channels,
press the Up or Down
Arrow Key. When
complete, arrow to
update and press OK.
10 Settings
To Next Page
Loading...
Need help?
General
