ADJ Products, LLC - www.adj.com - KAOS User Manual Page 20 ADJ Products, LLC - www.adj.com - KAOS User Manual Page 21
KAOS UC IR Control
The UC IR infrared remote gives you control of various functions.
To control the fixture you must aim the remote at the front of the fix-
ture and be no more then 30 feet away.
STAND BY - Pressing this button will blackout the fixture.
FULL ON - Hold this button down to fully light up the unit. When you
let the button go, the unit will return to its previous state.
FADE/GOBO - This button is invalid for this fixture.
“DIMMER +” and “DIMMER -” - These buttons are invalid for this
fixture.
STROBE - Press and hold this button for random strobing. Press the
button to activate sound active strobing.
COLOR - Press this button and use buttons 1-4 to select either of
the RGBW colors.
1-9 - When in color or show mode these buttons will allow you to se-
lect your desired color or show. See Color or Show for more info.
SOUND ON & OFF - These buttons activate and deactivate the
sound active mode.
SHOW - This activates the show mode. Press the 0 button to activate
Show 0, then use buttons 1-9 to select your desired show. Press the
0 button again and Show 10 will be displayed. Now use buttons 1-5
to select shows 11-15. Press the 0 button again and Show 0 will be
displayed.
KAOS 2 Channel Mode
Channel Value Function
1 SHOWS
0 - 7 OFF
8 - 23 SHOW 1
24 - 39 SHOW 2
40 - 55 SHOW 3
56 - 71 SHOW 4
72 - 87 SHOW 5
88 - 103 SHOW 6
104 - 119 SHOW 7
120 - 135 SHOW 8
136 - 151 SHOW 9
152 - 167 SHOW 10
168 - 183 SHOW 11
184 - 199 SHOW 12
200 - 215 SHOW 13
216 - 231 SHOW 14
232 - 247 SHOW 15
248 - 255 SOUND ACTIVE
2 SHOW SPEED/SOUND SENSITIVITY
0 - 255 SHOW SPEED SLOW - FAST
0 - 255 LEAST SENSITIVE - MOST SENSITIVE
When Channel 1 is between the values of 8-247, Channel 2 will con-
trol show speed.
When Channel 1 is between the values of 248-255, Channel 2 will
control sound sensitivity.
To Next Page
Loading...
