To Next PageTo Next Page
Need help?Do you have a question about the ADJ KAOS and is the answer not in the manual?
Notice on energy saving by turning off products when not in use.
Instructions for unpacking, product introduction, and customer support.
Lists the key features of the KAOS fixture.
Details the automatic voltage sensing feature for power supply.
Explains DMX protocol, linking, and cable requirements.
Explains the conversion between 3-pin and 5-pin XLR DMX connectors.
Explains the importance and method of line termination for DMX.
Instructions for setting the DMX address for fixture control.
How to select the desired DMX channel mode for the unit.
Configuration for master/slave setup, setting unit as master or slave.
Guide to selecting and operating the built-in show modes.
Instructions to activate or deactivate sound active mode.
Setting the unit's behavior when DMX signal is lost or power is applied.
Functions to activate tilt inversion for bars 1, 2, and 3.
Initiates self-test and allows manual testing of individual fixture features.
Controls the backlight LED display timeout.
Displays running time and resets the unit to factory defaults.
Adjusts the home position for pan and tilt movements.
How to operate in sound-reactive and show modes.
Guidelines for cleaning the fixture to maintain optimal performance.
Outlines the specific warranty periods for different product types.
Model, voltage, LEDs, power consumption, beam angle, dimensions, colors, weight, fuse, duty cycle.
Lists DMX modes and explains auto voltage sensing capability.
States warranty duration and recommended safe working positions.
Notice on energy saving by turning off products when not in use.
Instructions for unpacking, product introduction, and customer support.
Lists the key features of the KAOS fixture.
Details the automatic voltage sensing feature for power supply.
Explains DMX protocol, linking, and cable requirements.
Explains the conversion between 3-pin and 5-pin XLR DMX connectors.
Explains the importance and method of line termination for DMX.
Instructions for setting the DMX address for fixture control.
How to select the desired DMX channel mode for the unit.
Configuration for master/slave setup, setting unit as master or slave.
Guide to selecting and operating the built-in show modes.
Instructions to activate or deactivate sound active mode.
Setting the unit's behavior when DMX signal is lost or power is applied.
Functions to activate tilt inversion for bars 1, 2, and 3.
Initiates self-test and allows manual testing of individual fixture features.
Controls the backlight LED display timeout.
Displays running time and resets the unit to factory defaults.
Adjusts the home position for pan and tilt movements.
How to operate in sound-reactive and show modes.
Guidelines for cleaning the fixture to maintain optimal performance.
Outlines the specific warranty periods for different product types.
Model, voltage, LEDs, power consumption, beam angle, dimensions, colors, weight, fuse, duty cycle.
Lists DMX modes and explains auto voltage sensing capability.
States warranty duration and recommended safe working positions.
Power| voltage | 100V ~ 240V/50~60Hz |
|---|---|
| power consumption | 140W |
| fuse | 3.15A |
Lighting| LEDs | 9 x 10W RGBW LEDs |
|---|---|
| beam angle | 5 Degrees |
| colors | RGBW |
Weight and Dimensions| dimensions | 18”(L) x 17”(W) x 8.25”(H) |
|---|---|
| dimensions (metric) | 458 x 423 x 186mm |
| weight | 23.3 Lbs. / 10.6 kgs. |
