ADJ KAOS - System Menu: Tilt and Control; Tilt Invert Settings; Auto Test and Manual Control; Back Light

ADJ Products, LLC - www.adj.com - KAOS User Manual Page 15ADJ Products, LLC - www.adj.com - KAOS User Manual Page 14
KAOS System Menu
or DOWN buttons to select “Invert” to activate tilt inversion, or
“Normal” to deactivate tilt inversion.
3. Press ENTER, and then press and hold the MENU button for
at least 3 seconds to activate.
Back Light - With this function you can have the
backlight LED display turn off after 10 seconds.
1. Press the MENU button until “Back Light” is displayed,
press ENTER.
2. The display will show either “ON” or “OFF”. Press the UP or
DOWN buttons to select “ON” to keep the LED display on at
all times, or “OFF” to switch to have the LED display switch o
after 10 seconds. To make the display reappear, press and hold
the MENU button for at least 5 secs.
3. Press ENTER to conrm. To make the display reappear, press
and hold the MENU button for at least 5 secs.
Auto Test - This function will run a auto test.
1. Press the MENU button until “Auto Test” is displayed, press
ENTER.
2. The xture will now run a self test.
Manual Control - With this function you can manu-
ally test the individual features.
1. Press the MENU button until “Manual Contol” is displayed,
press ENTER.
2. Use the UP or DOWN buttons to nd the functions that you
wish to test.
3. Once you nd a function you wish to test, press the ENTER
sion, or “Normal” to deactivate pan inversion.
3. Press ENTER, and then press and hold the MENU button for
at least 3 seconds to activate.
Tilt Invert 1 - This function activates bar 1 tilt inver-
sion .
1. Press the MENU button until “Tilt Invert 1” is displayed,
press ENTER.
The display will show either “Normal” or “Invert”. Press the UP
or DOWN buttons to select “Invert” to activate tilt inversion, or
“Normal” to deactivate tilt inversion.
3. Press ENTER, and then press and hold the MENU button for
at least 3 seconds to activate.
Tilt Invert 2 - This function activates bar 2 tilt inver-
sion .
1. Press the MENU button until “Tilt Invert 2” is displayed,
press ENTER.
The display will show either “Normal” or “Invert”. Press the UP
or DOWN buttons to select “Invert” to activate tilt inversion, or
“Normal” to deactivate tilt inversion.
3. Press ENTER, and then press and hold the MENU button for
at least 3 seconds to activate.
Tilt Invert 3 - This function activates bar 3 tilt inver-
sion .
1. Press the MENU button until “Tilt Invert 3” is displayed,
press ENTER.
The display will show either “Normal” or “Invert”. Press the UP
KAOS System Menu