Adtech ADTECH9 Series User Manual

ADTECH9 Series CNC Maintenance Manual
- 177 -
Note : Default value is generally used to set tapping closed loop adjustment
parameters
035 Tapping hole bottom delay
Range :
Unit : None
Authority : Operation admin or higher
Default : 100
Effective time : Instant
Note : Default value is generally used to set tapping closed loop adjustment
parameters
036 If tapping collects data?
Range :
Unit : None
Authority : Operation admin or higher
Default : 100
Effective time : Instant
Note : Set the data collected during the tapping process for the graphical
analysis of the tapping effect
037 Max allowable tapping error
Range :
Unit : None
Authority : Operation admin or higher
Default : 10000
Effective time : Instant
Note : To set the maximum allowable error during tapping to prevent abnormal
conditions such as screw tap breaking
038 Tapping fixed cycle type
Range :

Adtech ADTECH9 Series Specifications

General

Brand	Adtech
Model	ADTECH9 Series
Category	Control Systems
Language	English