Advanced Instruments ARTEL PCS User Manual

With the power switch turned off and
instrument unplugged from power outlet,
loosen two quarter-turn fasteners on rear of
instrument and gently lift off instrument rear
cover.
Remove existing EEPROM card by gently pulling up
on the card. Follow the placement instruction
printed on the new EEPROM card. Carefully insert
new EEPROM card by gently but fully pressing card
into slot.
Place cover back on instrument, tighten
quarter-turn fasteners, and power on the
instrument.
PCS Instruments purchased prior to August 2016 will require a replacement EEPROM card for use with ArtelWare.
How to install the new EEPROM card:
1 2 3
Configuring PCS2/PCS3 Instruments for ArtelWare
4

Advanced Instruments ARTEL PCS Specifications

General

Brand	Advanced Instruments
Model	ARTEL PCS
Category	Laboratory Equipment
Language	English