Advantech Adam-4012 User Manual

Chapter 4 Command Set 4-31
Chapter 4
Command Syntax Command Name Command Description Page No.
%AANNTTCCFF Configuration Sets address, baud rate, and/or checksum
status, to a digital I/O module
4 152
$AA6 Digital Data In Returns the values of the digital I/O
channels of the addressed module
4 154
#AABB(data) Digital Data Out Writes specified values to either a single
channel or all channels simultaneously
4 156
#** Synchronized
Sampling
Orders all digital I/O modules to sample
their input values and store them in a
special register
4 158
$AA4 Read
Synchronized Data
Return the value of a specified digital I/O
module that was stored after an #**
command was issued
4 159
$AA2 Configuration
Status
Returns the configuration parameters of a
specified digital I/O module
4 161
$AA5 Reset Status Indicates whether a specified digital I/O
module was reset after the last time the
$AA5 command was issued
4 163
$AAF Read Firmware
Version
Return the firmware version code from the
specified digital I/O module
4 165
$AAM Read Module
Name
Return the module name from the
specified digital I/O module
4 166
ADAM-4060/4068 Command Table

Advantech Adam-4012 Specifications

General

Brand	Advantech
Model	Adam-4012
Category	Other
Language	English