4-142 ADAM 4000 Series User's Manual
Command Set
4021
$AAF
Name Read Firmware Version
Description The command requests the analog output module at address
AA to return the version code of its firmware
Syntax $AAF (cr)
$ is a delimiter character.
AA (range 00-FF) represents the 2-character hexadecimal
address of the analog output module that you want to
interrogate.
F identifies the version command.
(cr) is the terminating character, carriage return (ODh)
Response !AA(Version)(cr) if the command is valid.
There is no response if the module detects a syntax error or
communication error, or if the specified address does not exist.
! is a delimiter character indicating a valid command was
received.
AA (range 00-FF) represents the 2-character hexadecimal
address of an analog output module.
(Version) is the version code of the module’s firmware at
address AA.
(cr) is the terminating character, carriage return (ODh).
To Next Page
Loading...