ADAM-4570 Series User Manual 42
3.4.6 Advanced Settings
The serial device server provides the advanced settings for some special
applications which need critical time requirements. In normal applica-
tions, these settings are recommended not to be set to avoid the unusual
action happened.
Delay Time (ms)
When enabled, the serial port will postpone the received data for the time
interval you set, and then send the received data to the TCP/IP network.
Ignore Purge
Some application program will purge the serial port the first time opens
this serial port. You can ignore the purge command by enable this option.
Disable Character Timeout Detection
Enable this option will disable the serial port character timeout detection.
Disable Multiple Connection
Enabling this option will disable the multi-access function, thus the only
one TCP connection is allowed on this serial port.
Note These settings are just for special applications. We recom-
mend not enabling advanced settings in normal usage.
To Next Page
Loading...
Need help?
General
