Advantech ADAM-5510/P31 User Manual

ADAM-5510/P31 A-3
Appendix A
4. Now relay 1 is closed and the others are open. So again the logic
states change. Line 0002 is true and the others are false.
5. Following a 10-second delay, relay 2 is set and relay 1 is reset by
itself.
6. The operation of this example is easily grasped: after the initial
state, these six relays are turned on and off one by one, only one at
a time. Each relay turns on in turn at 10-second intervals. This
example demonstrates a sequential and cyclic switching process.

Advantech ADAM-5510/P31 Specifications

General

Brand	Advantech
Model	ADAM-5510/P31
Category	Controller
Language	English