Advantech EKI-6233BN - Network Connection; Figure 2.11 Positioning the Antenna; Figure 2.12 Ethernet Plug & Connector Pin Position

EKI-6233BN User Manual 13
Figure 2.11 Positioning the Antenna
2.2.4 Network Connection
For RJ45 connectors, data-quality, twisted pair cabling (rated CAT5 or better) is
recommended. The connector bodies on the RJ45 Ethernet ports are metallic and
connected to the GND terminal. For best performance, use shielded cabling.
Shielded cabling may be used to provide further protection.
Figure 2.12 Ethernet Plug & Connector Pin Position
Maximum cable length: 100 meters (328 ft.) for 10/100BaseT.
Note! The location and position of the antenna is crucial for effective wireless
connectivity
P1P1 WLAN
P2 P2
SYS SYS
EKI-6233BN
Straight-thru Cable Wiring Cross-over Cable Wiring
Pin 1 Pin 1 Pin 1 Pin 3
Pin 2 Pin 2 Pin 2 Pin 6
Pin 3 Pin 3 Pin 3 Pin 1
Pin 6 Pin 6 Pin 6 Pin 2
8
1