Advantech EKI-6233BN - Wirelessadv; Reboot; Mrfc2217

66 EKI-6233BN User Manual
Usage: wireless encryption [none|wep|wpa-psk|wpa-enterprise]
Set encryption type.
Usage: wireless wepidx [0|1|2|3]
Set WEP key index.
Usage: wireless wepkey [asc|hex] []
Set WEP key as [] in specific format.
Usage: wireless wpakey []
Set WPA-PSK key as [].
Usage: wireless wpaeap [tls|ttls|peap]
Set WPA-Enterprise EAP method.
Usage: wireless wpaid []
Set WPA-Enterprise identity as [].
Usage: wireless wpapw []
Set WPA-Enterprise as [].
Usage: wireless wpaphase [mschapv2|md5]
Set WPA-Enterprise inner authentication.
Usage: wireless capw []
Set private key as [].
Usage: wireless cacert
Import the CA certification from host PC to device.
Usage: wireless caclient
Import the Client certification from host PC to device.
Usage: wireless cakey
Import the private key from host PC to device.
5.3.16 wirelessadv
Usage: wirelessadv
Show device wireless advance informations.
Usage: wirelessadv roaming [on|off]
Enable/disable Roaming.
Usage: wirelessadv rssi [10|…|95]
Set connection quality monitor RSSI threshold.
Usage: wirelessadv rssi_hyst [0-24]
Set connection quality monitor RSSI hysterisis.
Usage: wirelessadv scanint_high [10|…|600]
Set scan interval when received signal strength is better than RSSI threshold.
Usage: wirelessadv scanint_low [10|…|600]
Set scan interval when received signal strength is worse than RSSI threshold.
5.3.17 reboot
Usage: reboot
Write settings and reboot the system immediately.
5.3.18 mrfc2217
Usage: mrfc2217
Show all port mode and mode informations.