Advantech EKI-6233BN - Network Settings; Figure 3.10 Utility Overview

26 EKI-6233BN User Manual
3.4 Network Settings
Prior to setting up the server’s IP address determine the IP address mode.
There are four mode types available:
 Static IP: mode to assign a specific assigned address
 DHCP / AutoIP: mode to automatically assign IP addresses through a DHCP
server
 BOOTP / AutoIP: mode to automatically assign an IP address through the
configuration server
 DHCP/BOOTP/AutoIP: mode to automatically assign an IP address using a
Bootstrap Protocol or DHCP server.
The server is set with the following default IP configuration:
 10.0.0.1
The EKI-6233BN includes a software utility option, which you can install on your
system, for configuration through computer-based software. The EKI-6233BN also
includes a web interface option for configuration through a standard web browser.
Figure 3.10 Utility Overview