UNO-2372G User Manual 2
1.1 Introduction
Advantech’s new-generation UNO-2000 series of embedded automation computers
are highly ruggedized modular, fanless systems. The incredible modularity of UNO-
2372G offers numerous performance and cost-saving advantages, including the
elimination of unnecessary features and expenses, accelerated production and deliv-
ery, rapid deployment and integration, reduced system downtime and maintenance
costs, and support for future upgrades and expansion. The UNO-2372G is equipped
with optimized I/O and an optional second expansion stack that supports Advan-
tech’s iDoor technology. This allows the platform functionalities to be easily extended
and customized with the integration of various iDoor modules, including industrial
Fieldbus, wireless communication, I/O, and peripheral modules, in order to provide
purpose-built, future-proof solutions that satisfy specific application requirements.
1.2 Safety Precautions
Below are a few safety precautions for preventing injury when making connections. In
most cases, users can use a standard cable for connection.
Warning! Always disconnect the power cord from the chassis before manual han-
dling. Do not connect the chassis while the system power is on. A sud-
den rush of power can damage sensitive electronic components. Only
experienced electronics personnel should open the chassis.
Warning! Toujours à la terre pour éliminer toute charge d'électricité statique avant
toucher UNO-2372G. Appareils électroniques modernes sont très sensi-
bles à charges d'électricité statique. Utilisez un bracelet antistatique à
tout moment. Placez tous composants électroniques sur une surface
antistatique ou dans un statique-sac blindé.
Caution! Always ground yourself to remove any static electric charge before
touching UNO-2372G. Modern electronic devices are very sensitive to
static electric charges. Use a grounding wrist strap at all times. Place all
electronic components on a static-dissipative surface or in a static
shielded bag.
Caution! Toujours débrancher le cordon d'alimentation de votre boîtier lorsque
vous êtes travailler. Ne branchez pas lorsque l'appareil est allumé. Un
afflux soudain de puissance peut endommager les composants électro-
niques sensibles. Seulement connu personnel de l'électronique
devraient ouvrir le châssis.
To Next Page
Loading...
