VISLINK
Newswift 90-180 Motorised Antenna 32
Set Elevation Angle
Command: SEC±xxx
Response: SEC±xxx
±xxx New Elevation angle, in range 0° to 90°. Units 0.1°.
Only works if system deployed, elevation axis calibrated, and no inclinometer error.
Clear Alarms
Command: CA
Response: CA
Monitoring start
Command: MMS
Response: MMS
Monitoring finish
Command: MMF
Response: MMF
Reset Mantis Angles. (Mantis systems Only)
Command: RMA
Response: RMA
Resets all Mantis axis to the stowed position values.
Query Feed Position
Command: QFP
Response: FPx
x Feed Position 1: Feed position 1
2: Feed position 2.
M: Feed moving.
E: Feed position error.
To Next Page
Loading...