AED HeartPlus NT-180 - Product Specification and Function

Section I -Product Introduction
6
Product Specification and Function
Defibrillator
 Discharge Current Waveform: BTE (Biphasic Truncated
Exponential)
 Discharge Time: Automatically adjusted energy for
patient impedance
 Output Energy:
- 180J (for adult, load impedance of 50)
- 50J (for infant, load impedance of 50)
 Patient Insulation: BF Type
 Charging period: Less than 13 seconds after pads
attachment.
 Operation Mode: AED (automated external
defibrillator), which can analyze ventricular fibrillation
 Change Method to Pediatric Mode: Power on device
in Pediatric Mode (small yellow button)
ECG
Induction Method of ECG: LEADⅡ
All-in-one Type
Cartridge
(Pre-connected
Battery And
Electrode Pads)
Basic
Specification
 Composition: Disposable Electrode
pads, Battery
 Frequency of Use: One time
 Packing Method: Sealing Packaging
 Size: 150(W) X 110(L) X 33(H)mm
 Warranty: 2 years (Sealed storage at
room temperature)
Electrode
Pads
 Frequency of Use : Single Use
 Size: 125mm X 95mm
 Area: 76.63㎠ (PE Foam, Hydrogel)
 Wire Length: 1.2m
 Attachment point: Showed in picture on