AED HeartPlus NT-180 - Page 35

Section II - Product Use
31
7. Keep away from the patient according to the voice
from the product.
 Voice prompt: “Stay clear of patient.”
 User must stay clear of the patient and the
HeartPlus™ device during analysis of patient's
state.
8. HeartPlus™ automatically analyzes the
electrocardiogram.
 Voice prompt: “Still diagnosing.”
 Lamp state: Electrode pad lamp ( ) is already
ON and ECG analysis lamp ( ) flickers.
 After the ECG analysis is complete, ECG analysis
lamp is already ON.
9-1. Situation requiring a defibrillation shock.
 Voice prompt: “Performing an electric shock”
(Charge Beep)
 Lamp state: Electrode pad attachment lamp
( ) and ECG analysis lamp ( ) are ON.
9-1-1. After the preparation for electric shock energy is complete:
 Voice prompt: “Press the flashing red button.”
 Lamp state: Electrode pad attachment lamp ( ) and ECG analysis lamp
( ) are ON, electric shock button ( ) flickers.